01Hot and cold on demand
Skip the kettle.
Cold, ambient and hot water up to 99°C cover drinking, brewing and cooking. HydroForm+ heats and chills as it pours.
Water purifiers
Countertop hot and cold purifier · HydroForm+
HydroForm+ hot and cold water purifier.
Hot, cold or ambient water at a touch—all filtered through RO in a purifier just 180 mm wide.
Finish shown · Carbon BlackPrice
From SGD 1,588.00
Colour
Carbon Black · Stellar White
Water modes
Hot · cold · ambient
Connection
Inlet + drain
Features & benefits
Hot, cold or ambient water, ready when you are.
HydroForm+ pours RO water hot, cold or ambient straight into your glass, with no tank to refill.
01
02RO-filtered water
RO filtration in every glass.
PAC pre-filtration improves taste and smell before the water reaches the RO and activated-carbon fibre cartridge, followed by UVC at the outlet.
03TDS and filter status
See the reading and know when each filter is due.
The display shows the live TDS reading and each filter's remaining life, right next to the temperature and volume controls.
Refill at home
Hot, cold and ambient water. Fewer bottles to bring home.
Fill a glass, a carafe or your own bottle straight from the counter, and buy, carry and store fewer bottles.
01
Use your own bottle
Refill the bottle or carafe you already have instead of reaching for another disposable one.
02
Ready at the counter
Cold, ambient and hot RO water from one purifier on the counter.
03
Less to carry and store
A steady supply at home means fewer bottled-water cases taking up cupboard or floor space.
TDS and filter status for HydroForm+
TDS and filter status on the screen.
The touch display shows the live TDS reading and how much life each filter has left.
01
RO treatment
RO-filtered water at each temperature.
PAC pre-filtration improves taste and smell before the RO/ACF cartridge and final outlet stage.
02
Live TDS
Check your RO reading.
The live TDS reading is on the display whenever you want to check it.
03
Filter life
Know when each filter is due.
HydroForm+ tracks each cartridge separately and shows the life left as a percentage.
Official product film & gallery
See HydroForm+ in motion.
Watch hot and cold water being poured and the touch display in use, then compare the Carbon Black and Stellar White finishes.
Official Velta film
HydroForm+ product film
Velta's film shows ambient, chilled and hot water, NanoPure RO filtration and the touch display in action.
HydroForm+ product views
Temperature control
Five presets, or set it by the degree.
From 5°C chilled to near-boiling, with five presets and 1°C steps in between.
01
5°C
Cold
Chilled water ready for drinking.
02
Ambient
Room temperature
Filtered water as it comes, neither heated nor chilled.
03
45°C
Warm
Warm rather than hot, for drinks and food preparation.
04
85°C
Hot
Hot water for tea and other drinks.
05
99°C
Near-boiling
Near-boiling water on demand, for black tea and cooking.
It chills up to 1.5 L an hour, and because it heats as it pours, hot water is continuous.
Installation
Piped in, on the counter.
HydroForm+ needs a cold-water line, a drain for reject water and a power point, so check all three reach the spot you have in mind.
From inlet to glass
01
Cold-water inlet
0.1–0.4 MPa operating pressure
02
PAC + RO/ACF
Two composite cartridges
03
Temperature + outlet
Hot, cold or ambient water
Reject-water drain
Reject water from the RO stage drains away on its own through a small line, so there is no tank to empty. It just needs a route to your drain.
01
Footprint
180 × 425 × 380 mm. It is slim, but allow room behind, above and in front of it.
02
Power
A power point nearby. Heating draws up to 2,100 W.
03
Service access
Keep the two filters, the shut-off valve, the tubing and the vents easy to reach.
Filtration
Two composite cartridges and an outlet UV stage.
A PAC pre-filter, reverse-osmosis membrane, activated-carbon fibre and outlet UVC work together from inlet to glass.
01
PAC composite
Sediment pre-filter
Catches particles before they reach the later stages.
02
PAC composite
Activated carbon
Carbon that deals with taste and odour.
03
RO + ACF composite
RO membrane
A reverse-osmosis membrane, 0.0001 µm nominal (manufacturer figure).
04
RO + ACF composite
Post-carbon
A final activated-carbon stage after the RO membrane.
05
2.5 W UVC LED
UV at outlet
A UVC LED at the outlet, the last stage before your glass.
HydroForm+ pours RO-filtered water hot, cold or ambient, with no kettle to wait for.
Display & controls
Everything on one display.
Temperature, serving volume, filter status, TDS, child lock and rinse, all on the one touch display.
01
Live TDS display
Shows the live TDS reading on the main screen.
02
Filter-life monitor
Shows the estimated life remaining for both cartridges.
03
Auto-rinse
Rinses automatically after a filter change, with a manual rinse button too.
04
Child lock
Helps stop hot water being poured by accident. Still keep an eye on children around it.
05
Eco mode
Cuts power use when the purifier is idle.
Filters & maintenance
Two filters. HydroForm+ tells you when.
Replace each one when HydroForm+ prompts you, or when it reaches its capacity or age, whichever comes first.
PAC filter
2,100 L / ~6 months
Or sooner, if HydroForm+ prompts you.
RO + ACF filter set
3,000 L / 1 year
Or sooner, if HydroForm+ prompts you.
Replacements
Order from Velta
Order replacement filters directly from Velta Singapore.
How it works
Inside HydroForm+.
The filters, the UVC outlet, the temperature controls and the front panel where the filters swap out.
HydroForm+ in motion
Watch the heating and chilling hardware, the touch display and a pour, in motion.
Two cartridges plus an outlet UV stage
PAC and RO/ACF composite cartridges filter the water before a 2.5 W UVC LED at the outlet.
Slim, but it needs depth
At 180 mm wide it takes almost no counter width. Allow for its 425 mm depth, room in front to pour, and space for the inlet, drain, power and servicing.
Both filters open from the front
Open the front panel to replace either cartridge. The two filters have different replacement schedules.
Plumbed straight into your water supply
There is no tank to refill. HydroForm+ needs a cold-water inlet, drain, power point and accessible shut-off valve.
Specifications
HydroForm+ specifications.
See temperature settings, flow, filters, dimensions, power and connection requirements.
- Water modes
- Hot · cold · ambient
- Temperature presets
- 99°C · 85°C · 45°C · ambient · 5°C
- Temperature range
- 5–100°C · adjustable in 1°C steps
- Flow rate
- 0.52 L/min
- Cold output
- 1.5 L/hour
- Hot output
- Continuous
- Filter system
- PAC composite + RO/ACF composite
- RO membrane
- 0.0001 µm nominal
- PAC filter capacity
- 2,100 L
- RO + ACF filter capacity
- 3,000 L
- UV outlet
- 2.5 W UVC LED
- Water supply
- Plumbed-in cold-water inlet + reject-water drain
- Operating pressure
- 0.1–0.4 MPa
- Power supply
- 220–230 V · 50/60 Hz
- Heating / cooling
- 2,100 W / 125 W
- Dimensions (W × D × H)
- 180 × 425 × 380 mm
- Net weight
- 7.3 kg
- Materials
- BPA-free ABS + metal
- Colours
- Carbon Black · Stellar White
- Controls
- TDS · filter life · auto-rinse · child lock · eco
- Warranty
- 24 months
Membrane scale and filter capacities are manufacturer ratings.
Installations
HydroForm+ in Singapore kitchens.
See how much counter it needs, where the connections run and how the filters are reached.
Compare alternatives
Countertop, sparkling or under-sink.
01
Tap water + kettle
Choose it for the simplest, lowest-cost setup.
Keep your existing setup if you are happy with tap water and a kettle.
02
HydroView+
Choose it to keep the counter clear.
Ambient RO water from its own faucet by the sink. No hot or cold.
03
HydroSpark+
Choose it if you want sparkling too.
Adds sparkling water and a refill-tank option, but costs more and needs 508 mm of counter depth.
Frequently asked questions
HydroForm+ FAQs.
Does HydroForm+ need plumbing?
Yes. HydroForm+ pipes into your cold-water supply, with a small drain line for RO reject water, a power point nearby and enough clearance for use and servicing. It sits on the counter, but there is no tank to fill: it is a plumbed-in purifier, not a plug-and-pour one.
Does HydroForm+ use a storage tank?
No. HydroForm+ connects directly to the water line, so there is no tank to refill. Inside, small chambers hold water at temperature so it pours hot or cold on demand.
Can I prepare infant formula at the 45°C preset?
Not on its own. The 45°C preset is convenient, but follow current health guidance on preparing infant formula, including the water temperature it calls for, and check the water yourself before use. HydroForm+ does not replace food-safety guidance.
What do the Carbon Black and Stellar White options change?
Just the colour. Both share the same features and specifications. Come to the showroom if you would like to see them side by side.
How often are the HydroForm+ filters replaced?
Replace each filter when HydroForm+ prompts you, or at its limit, whichever comes first: PAC every 2,100 L or about 6 months; RO + ACF every 3,000 L or 12 months.
What does HydroForm+ show about filter performance?
The touch display shows a live TDS reading and the remaining life of each filter, so you can see how it is doing and when the next change is due.
Why use RO when Singapore tap water is safe?
It is a choice, not a safety need. RO lowers dissolved solids further than carbon alone, and HydroForm+ pours that water hot, cold or ambient without waiting for a kettle.
Does HydroForm+ make sparkling water?
No. HydroForm+ pours hot, cold and ambient water. If you want sparkling as well, HydroSpark+ adds it, with a refill tank or piped in, though it costs more and takes more counter depth.
What warranty does HydroForm+ have?
HydroForm+ comes with a 24-month warranty from Velta Singapore.
Related guides
Learn more about water purifiers.
Water purifier guide · 01
How to choose a purifier
Compare installation, water modes, filters and warranty across the Velta range.
Water purifier guide · 02
What reverse osmosis does
How the membrane works and where the reject water goes.
Water purifier guide · 03
Purifier or dispenser?
Filtering and heating or chilling are different jobs. Work out which one you are actually buying.
HydroForm+
Ready for hot, cold and ambient RO water?
Pick a finish and add HydroForm+ to your cart.