Airflow
441 m³/h smoke CADR
Published coverage up to 62 m²; layout and fan setting matter.
Air purifiers · Singapore

Powerful airflow. Filters you wash and reuse.
441 m³/h smoke CADR · Up to 62 m² coverage
At a glance
The detail follows below.
Airflow
441 m³/h smoke CADR
Published coverage up to 62 m²; layout and fan setting matter.
Filter care
Wash and fully dry
Washable pre-filter and CoreCharge™ collector. No routine disposable filter purchase under normal use.
Sensors
PM2.5 + TVOC
Local sensor readings, not a comprehensive air safety score.
Space
480 × 480 × 180 mm
Width × height × depth. Allow room for airflow and cleaning.
Features & benefits
People, pets, cooking and outdoor haze all change the air at home. AirLab P80S moves a lot of air, catches particles on filters you wash and reuse, keeps its insides hygienic with UV-C and shows live readings, all in one slim purifier.

The washable pre-filter catches larger particles first.
The pre-filter catches visible hair early. Finer particles that carry allergens travel on to the next stage.
Fine particles in the air are pulled through the charged CoreCharge™ collector.
Airborne spores and debris can be caught as room air passes through the purifier again and again.
AirLab can only catch what the air carries to it. Dust and hair that have already settled still need regular cleaning.
Sensing and app control
AirLab shows PM2.5 and TVOC side by side. Connect it to Wi-Fi and you can change the fan speed and switch between Auto, Sleep and Turbo from your phone.
01 · On AirLab
Two indicators show particle levels and a broad gas trend side by side. In Auto mode, the fan responds to what the sensors read near the purifier.
02 · In the Velta App
Connect over 2.4 GHz Wi-Fi to check air-quality readings, set the fan level and switch between Auto, Sleep and Turbo.
A TVOC sensor shows a broad trend, not the identity or concentration of a specific chemical. Remove known sources and ventilate where appropriate.

Film & gallery
Watch AirLab P80S at work, then read on for its washable filters, sensors and everyday controls.


How it works
Room air moves through four steps: screen out larger debris, capture finer particles, keep the inside of the machine hygienic and keep the room air circulating.

The washable outer layer catches visible dust, floating hair, pollen and larger debris.
Fine particles pick up an electrical charge and stick to the collector surfaces until you wash the panel.
A sealed UV-C module inside the machine works to reduce microbial build-up on its internal surfaces and parts.
Ions charge particles in the air, helping them clump together or settle, while AirLab keeps circulating and filtering the room air.
The enclosed UV-C module supports hygiene inside the purifier. It does not sterilise an occupied room and is not a substitute for ventilation, cleaning or medical infection-control measures.
Independent laboratory evidence
The Malaysian P80S launch material reports eight performance tests across three independent laboratories, including SGS. The results below come from controlled methods on the same purifier hardware platform.

≥99.9%
Measured at 14.6 nm, 51.4 nm and 101.8 nm particle sizes.
99.2%
Measured under controlled chamber conditions.
98.1%
Measured on the same purifier hardware platform.
>99.99%
E. coli reduction in controlled internal-module testing.
Each result comes from a different controlled method, so do not compare them head to head.
Performance in a home varies with room volume, airflow, placement, operating mode, active sources and maintenance.
Installation & space
AirLab needs power and a stable position with clear airflow. Its 480 × 480 × 180 mm body should leave room for the inlet, outlet and access to the washable collector. Follow the manual’s placement instructions; published coverage depends on the room layout and fan setting.
Slim profile · serious airflow
S$688 in Singapore, including GST, with a 2-year Singapore warranty.
Compare alternatives
AirLab is Velta's current room air purifier. When comparing alternatives, use smoke CADR alongside your room size, fan noise and cleaning or replacement-filter requirements.
Frequently asked questions
Straight answers on washable filters, pets, sensors, UV-C, room size and ordering in Singapore.
No. It uses a washable pre-filter and a washable CoreCharge™ electrostatic collector. They still need regular cleaning and must be fully dry before they go back in.
Its pre-filter catches larger pet hair while CoreCharge™ targets finer airborne particles, including dander carried through the purifier. Controlled testing on the same hardware platform measured 98.1% pet-hair capture and 94.7% ammonia reduction. Cleaning still matters in homes with shedding pets.
They show current sensor readings near the machine. PM2.5 describes fine particles; TVOC is a broad signal for changing volatile compounds. Neither reading identifies every pollutant or replaces source control and ventilation.
It works inside the enclosed airflow path to reduce microbial build-up within the purifier. It is not a substitute for ventilation, routine cleaning or medical infection-control measures.
The manufacturer rates it for rooms up to 62 m², with a smoke CADR of 441 m³/h. Actual performance varies with room volume, doors, placement, fan setting, pollutant sources and maintenance.
Yes. Sleep mode lowers the fan speed and dims the display. Keep at least 30 cm of clearance around the purifier so its inlet and outlet remain unobstructed.
AirLab P80S is S$688 including GST and comes with a 2-year Singapore warranty. Order it online and you will see delivery options and charges at checkout.
Related guides
Read how CADR, electrostatic collection, PM2.5 and TVOC sensing relate to choosing and using a room air purifier.
No filters to buy
Instead of buying replacement filters, you clean them. With normal care, you wash and reuse the pre-filter and CoreCharge™ collector.

01
Rinse about every two weeks
Clear hair, lint and larger dust before they build up and restrict the air path.
02
Wash every one to three months
How often depends on how long it runs and the air in your room.
03
Refit only when fully dry
Let both washable parts dry completely before you put them back.
Washable does not mean maintenance-free. Delayed cleaning, blocked airflow or refitting damp filters can reduce performance or damage the purifier.
You may also need
The pre-filter and CoreCharge™ collector are washable. Wash and fully dry them as directed in the manual. Contact Velta if you need a replacement part or help with cleaning.
AirLab P80S · Singapore
High-volume airflow, washable filters, sealed UV-C and live sensing in one slim purifier. Price includes GST.
