01Under-sink design
Keep your worktop clear.
The purifier sits inside the cabinet, leaving only its faucet on the worktop. Installation needs a water inlet, RO drain, power point and room to change both cartridges.
Tankless under-sink RO purifier · HydroView+
Ambient RO drinking water from its own faucet, with the purifier hidden below the sink.

Price
SGD 2,188.00
Flow
2.1 L/min
Storage tank
None
Warranty
24 months
Features & benefits
HydroView+ hides the purifier below the sink and gives RO drinking water its own faucet, with a second lever for filtered rinse water.

01Under-sink design
The purifier sits inside the cabinet, leaving only its faucet on the worktop. Installation needs a water inlet, RO drain, power point and room to change both cartridges.
02RO drinking water
Particle filtration, carbon, reverse osmosis and a final carbon stage work together below the sink before the water reaches the faucet.
03Dual-outlet faucet
One lever gives you RO drinking water. The other gives filtered water for rinsing fruit and vegetables.
Refill at the sink
The HydroView+ faucet fills glasses, carafes and reusable bottles while cutting down on bottled drinking water at home.
01
Drinking water gets its own lever, separate from the rinse-water side.
02
Keep a reusable bottle or carafe ready and fill it directly at the sink.
03
No more lugging cases of bottled water home, or finding somewhere to keep them.
TDS and filter status for HydroView+
HydroView+ shows inlet and outlet TDS together at the faucet, with filter status and rinse controls on the same display.

01
RO treatment
Particle and carbon filters clean up the water before the RO membrane, with a final carbon stage after it.
02
Inlet and outlet TDS
Both readings sit on the faucet display, right where you fill your glass.
03
Filter life
HydroView+ tracks the CF and RO cartridges separately and shows their status on the faucet.
Official product film & gallery
Watch the under-sink purifier and display faucet at work, then take a closer look at the unit, faucet, filters and controls.
Official Velta film
Velta's film shows HydroView+ pouring RO water from its display faucet and feeding a Hhuhu hydrogen water machine.




Dual-outlet faucet
The right lever pours RO drinking water and the left pours filtered rinse water.
01
Right-side lever
Purified water for drinking and cooking.
02
Left-side lever
Filtered water for washing fruit and vegetables.

Installation
Your cabinet needs room for the purifier and its two cartridges, with access for servicing. It also needs a faucet opening, a cold-water inlet, a drain connection and a power point.
01
The body is 165 × 381 × 435 mm. Allow extra room for the trap, valves and whatever else lives under the sink, plus enough height to lift the cartridges out.
02
We connect to your cold-water line and run the RO reject-water line to the drain, with an isolation valve so it can be serviced later.
03
You will need an opening for the faucet and a power point under the sink for the 90 W unit.
Send a clear cabinet photo, complete measurements and the proposed faucet location before installation is scheduled.
Tankless direct flow
The 800 GPD direct-flow system filters water as you draw it, so there is no bulky tank taking up cabinet space.
01
Source range: 1–4 bar and 5–45°C.
02
The two-cartridge body filters on demand without a pressure tank.
03
Filtered water goes to the faucet. The concentrate goes to the drain.
Filtration
Two particle filters, carbon pre-treatment, reverse osmosis and post-carbon filtration work together before the water reaches the faucet.

01
The first particle filter.
02
Activated carbon before the RO membrane.
03
A second particle filter ahead of the membrane.
04
A 0.0001 µm membrane, as rated by the manufacturer.
05
A final carbon polish before the water reaches your glass.
HydroView+ pours RO drinking water, keeps the worktop clear, and can supply the purified water a Hhuhu needs.
Display & diagnostics
TDS readings, cartridge status, rinse controls and fault alerts, all on the faucet display.

01
See the TDS of incoming and filtered water side by side, right on the faucet.
02
Flushes itself every 12 hours if it has not been used.
03
Filter usage is remembered even after a power cut.
04
The display switches off when idle and wakes with a keypress or water use.
05
Lights and a beep warn you about filter expiry, unusually long flow and other faults.
06
Bluetooth is for our technicians when servicing. There is no consumer app.
Filter replacement
Replace each cartridge when HydroView+ prompts you, or at the capacity or time limit below, whichever comes first.
CF cartridge
Or sooner, if HydroView+ alerts you.
RO membrane
Or sooner, if HydroView+ alerts you.
Alerts
HydroView+ tracks each cartridge and tells you when it is due.
Replacement cartridges are available from Velta Singapore. HydroView+ comes with a 24-month warranty.
Inside the cabinet and at the faucet
See the under-sink purifier, five filtration layers, display faucet and replaceable cartridges.
See the under-sink body, display faucet and water flow in motion.

Two particle layers, sintered carbon, the RO membrane and post-carbon filtration make up its five stages.

The display shows inlet and outlet TDS readings, filter status, rinse and reset controls, and fault alerts.

HydroView+ can supply the low-TDS RO water that a separate Hhuhu machine needs.
Specifications
See flow, capacity, filtration, dimensions, power and installation requirements.
Compare alternatives
01
Choose it for an ambient filtered-water faucet and clear worktop.
The purifier lives under the sink, so your cabinet needs to take the faucet, power and drain work.
02
Choose it when hot and cold water matters more than a clear counter.
A 180 mm-wide plumbed-in countertop purifier with hot, cold and ambient water.
03
Choose it for sparkling, hot and cold water, or if you would rather not plumb it in.
Adds sparkling, hot and cold water, but needs 508 mm of counter depth.
Frequently asked questions
No. HydroView+ dispenses ambient (room-temperature) water only. If you want hot and cold, look at HydroForm+; HydroSpark+ adds sparkling as well.
The right lever dispenses RO drinking water. The left lever gives filtered water for rinsing fruit and vegetables.
The body is 165 mm wide, 381 mm deep and 435 mm high, but the cabinet also needs room for the trap, valves, tubing, a power point and enough height to lift out both cartridges. Send us a photo and measurements and we will confirm the fit before you buy.
HydroView+ uses its own dual-outlet faucet. Whether an existing opening can be reused depends on your mixer, sink and worktop. We check the faucet position and any drilling needed before installation.
There is no storage tank. HydroView+ filters water as you draw it, at up to 2.1 L/min, using a water inlet, drain line and power point under the sink.
Replace each cartridge when HydroView+ prompts you, or at its limit, whichever comes first: CF every 4,000 L or 12 months; RO every 8,000 L or 24 months.
The faucet display shows inlet and outlet TDS readings together, along with separate CF and RO filter status.
It is a choice, not a safety need. RO lowers dissolved solids further than carbon alone, and HydroView+ puts that water on its own tap without taking up worktop space.
HydroView+ comes with a 24-month warranty from Velta Singapore.
Related guides
Water purifier guide · 01
Compare installation, water modes, filters and warranty across the Velta range.
Water purifier guide · 02
How the membrane works and where the reject water goes.
Water purifier guide · 03
Singapore's tap water is safe to drink. This guide explains what home filtration can add on top.
HydroView+
Add HydroView+ to your cart and we will arrange the installation with you.