HydroView+ installation guide · Singapore

Installing HydroView+ below the sink

What to check in the cabinet before HydroView+ goes in: faucet, inlet, reject drain, power and room to lift the cartridges.

Under-sink installation

Installation overview

What to check before installation.

Check the water you want, the available space, the connections and the room needed for maintenance.

What you get

Ambient RO drinking water and filtered rinse water from its own faucet.

Space to allow

The 165 mm-wide body still shares the cabinet with the trap, valves, bins and tubing. Leave enough height to lift out both cartridges.

When it fits

HydroView+ suits kitchens where permanent faucet and cabinet work is fine and hot and cold water is not needed.

What to consider

It is ambient only. Agree the faucet position, drain route, power and future cartridge access before any drilling or joinery.

HydroView+ checklist

Run through these to make sure the machine, its connections and future servicing all fit the room.

Take a photo of the whole cabinet with the doors open.

Measure width, depth and height around the trap, valves, shelves and stored items.

Confirm the cold-water inlet, shut-off valve and drain route.

Agree the faucet position and any sink or worktop work.

Confirm protected power below the sink and keep water away from the connection.

Check both cartridges can be lifted out without disturbing other pipework.

After installation

Your model, serial number and installation date are all we need for warranty, filters and support later.

Keep your serial number and installation date. Warranty and support run on them.

Each model has its own filter, CO₂ or tank-cleaning schedule.

Knowing your model and history lets us help faster.

About HydroView+

Compare Velta

Check output, dimensions, installation, filters and warranty across all four Velta models.