What you get
Plumbed-in hot, cold and ambient RO water in a narrow countertop body.
Installations
HydroForm+ installation guide · Singapore
Installing a plumbed-in HydroForm+ purifier
What sits behind a slim HydroForm+: water inlet, reject drain, power, depth and room to service it.
Plumbed-in countertop installation
Installation overview
What to check before installation.
Check the water you want, the available space, the connections and the room needed for maintenance.
Space to allow
A slim front view can hide the 425 mm depth and the permanent water, reject-drain and power routes behind the appliance.
When it fits
HydroForm+ suits kitchens that want hot and cold water every day and can take a permanent plumbed-in countertop appliance.
What to consider
It does not make sparkling water and it sits on the counter, not under it. Keep the filter and pipe route reachable once the kitchen is finished.
HydroForm+ checklist
Six checks before installation.
Run through these to make sure the machine, its connections and future servicing all fit the room.
01
Measure the 180 × 425 mm counter footprint and the headroom above it.
02
Find a cold-water inlet with a shut-off valve.
03
Plan where the RO reject water will drain.
04
Confirm a suitable power point for the 2,100 W heating load.
05
Leave room at the side and rear for ventilation and servicing.
06
Keep the inlet, drain and power routes reachable for servicing.
After installation
Register, maintain, get support.
Your model, serial number and installation date are all we need for warranty, filters and support later.
Register
Keep your serial number and installation date. Warranty and support run on them.
Maintain
Each model has its own filter, CO₂ or tank-cleaning schedule.
Support
Knowing your model and history lets us help faster.
About HydroForm+
View the complete product details.
Compare Velta
Compare the Velta range.
Check output, dimensions, installation, filters and warranty across all four Velta models.