HydroSpark+ installation guide · Singapore

Installing HydroSpark+ on a kitchen counter

How to check counter depth, weight, power, tank or plumbed-in mode, waste-tank access and CO₂ changes before HydroSpark+ goes in.

Countertop installation

Installation overview

What to check before installation.

Check the water you want, the available space, the connections and the room needed for maintenance.

What you get

Sparkling, cold, ambient and hot water from one countertop position.

Space to allow

The 220 mm width is compact, but the 508 mm depth, 21.7 kg weight, headroom and space in front of the spout decide whether it fits.

When it fits

HydroSpark+ suits homes that will use sparkling, hot and cold water often enough to retire separate appliances.

What to consider

Tank mode means refilling and emptying by hand. Plumbed-in mode needs an inlet and drain. Both use a replacement filter and CO₂.

HydroSpark+ checklist

Run through these to make sure the machine, its connections and future servicing all fit the room.

Measure counter depth, headroom and the space in front of the spout.

Confirm the counter can support the 21.7 kg appliance plus filled tanks.

Choose the 5 L refill tank, or confirm a route for the inlet and drain.

Keep the rear, side and top clearance required by the supplied instructions.

Keep the filter, CO₂ cylinder, refill tank, waste tank and drip tray within reach.

Confirm a suitable 220–240 V power point for the published 2,250 W load.

After installation

Your model, serial number and installation date are all we need for warranty, filters and support later.

Keep your serial number and installation date. Warranty and support run on them.

Each model has its own filter, CO₂ or tank-cleaning schedule.

Knowing your model and history lets us help faster.

About HydroSpark+

Compare Velta

Check output, dimensions, installation, filters and warranty across all four Velta models.